Footbed unlock disk 1 0 0 zip 21122 Comprehensive Report, microsurvey cad 2010 crack and cocaine.
Galectin-3 is an adhesion/growth-regulatory protein with a modular design comprising an N-terminal tail (NT, residues 1–111) and the conserved carbohydrate recognition domain (CRD, residues 112–250). The chimera-type galectin interacts with both glycan and peptide motifs.
Complete 13C/ 15N-assignment of the human protein makes NMR-based analysis of its structure beyond the CRD possible. Using two synthetic NT polypeptides covering residues 1–50 and 51–107, evidence for transient secondary structure was found with helical conformation from residues 5 to 15 as well as proline-mediated, multi-turn structure from residues 18 to 32 and around PGAYP repeats. Intramolecular interactions occur between the CRD F-face (the 5-stranded β-sheet behind the canonical carbohydrate-binding 6-stranded β-sheet of the S-face) and NT in full-length galectin-3, with the sequence P 23GAW 26P 37GASYPGAY 45 defining the primary binding epitope within the NT. Work with designed peptides indicates that the PGAX motif is crucial for self-interactions between NT/CRD. Phosphorylation at position Ser6 (and Ser12) (a physiological modification) and the influence of ligand binding have minimal effect on this interaction. Finally, galectin-3 molecules can interact weakly with each other via the F-faces of their CRDs, an interaction that appears to be assisted by their NTs.
Overall, our results add insight to defining binding sites on galectin-3 beyond the canonical contact area for β-galactosides. Introduction A key question in order to understand aspects of cell sociology is to define the structural basis for the flow of biological information. Oligosaccharides are an ideal platform to store such messages (;;;;;;; ).
Guiding to the topic of our report, endogenous sugar receptors (lectins) serve as a link to translate this type of biochemical “wording” into cellular activities (for a recent review, see ). Besides the direct contact to the glycan, the modular structure of a lectin is then crucial for triggering post-binding effects (, ).
The topological display of the carbohydrate recognition domains (CRDs) is known to differ within lectin families, a challenge for structure–function analysis. Among the members of the galectin protein family, galectin-3 (Gal-3) is unique, due to its phylogenetically strictly conserved trimodular design (;;;;; ). This lectin (present in the nucleus, cytoplasm and extracellular matrix) usually binds to glycans containing β-galactosides, as well as to certain proteins and lipids (;;;;; ). Each section of its structure shown in Figure, i.e. The N-terminal peptide, the non-triple helical collagen-like repeats (8–13 in vertebrates) and the CRD, is essential for its distinct functions. However, a complete structure-based rationalization for its activities, which appear to be of clinical relevance, e.g.
In cardiac dysfunction and (osteo)arthritis (;;; ), has yet to be attained. Whereas crystallographic analysis of the CRD proved feasible (), attempts to crystallize the full-length protein have been unsuccessful. Therefore, the only option to proceed on this level of Gal-3 structural analysis is to engineer variants with a shortened N-terminal tail (NT) and to systematically test their tendency to crystallize (; ). In order to define the structure of the full-length protein, including sites for intra- and intermolecular self-binding, work in solution is thus necessary. In fact, sequential assignment of 1H, 13C and 15N resonances of the CRD of human Gal-3 had opened the door for NMR studies (;; ). Moving on from this basis, assignment work was recently completed for the full-length lectin (). This information now provides the opportunity to address numerous structure-based questions.
The satisfying correlation between crystallographic and NMR data are highlighted by the detection of the Pro117 cis-conformation in solution (), previously observed in crystals (). ( A) Schematic overview of the trimodular design of human Gal-3. The NT is composed of the peptide with two sites for Ser phosphorylation (N) and the nine non-triple helical collagen-like repeat units (I–IX), these being followed by the CRD. Looking at the full-length protein, differential scanning calorimetry and nano-electrospray ionization mass spectrometry had suggested the presence of secondary structure within the NT and the occurrence of two conformers, one likely compact and the other relatively unfolded, as indicated by a bimodal charge distribution (; ). Interestingly, modeling and NMR analysis of a slightly extended hamster Gal-3 CRD (; ) and initial comparison of 1H, 15N chemical shifts from human Gal-3 CRD () and full-length human Gal-3 () had shaped the idea for intramolecular interactions that would underlie the generation of a folded form. Given the physiological release of peptides from the NT by proteolysis up to its entire length, as listed in Figure, such self-binding may thus be impaired by proteolytic processing, with functional consequences.
The present NMR study starts with assessing whether the NT sequence itself had any elements of secondary structure. Whether an interaction between Gal-3's CRD and its tail (as free 15N-labeled polypeptide or as an integral part of the full-length lectin) can take place is then answered. In this context, preparative production of Gal-3 with serine phosphorylation within the N-terminal peptide (see Figure ) facilitates study of this physiological post-translational modification, whereas synthesis of the DiLacNAc tetrasaccharide enables us to monitor its influence on ligand binding. Finally, we employed NMR spectroscopy to investigate concentration-dependent changes in the quaternary structure of Gal-3. Search for secondary structure in the NT Previous NMR studies with hamster Gal-3 NT detected no “residual signals for NH protons showing that these had been completely exchanged for deuterium, thus indicating the absence of secondary structure containing strong hydrogen bonds” ().
Because 1H– 15N HSQC resonances from the NT in Gal-3 exhibit relatively narrow line widths and are minimally dispersed falling between 8.5 and 7.5 ppm, concluded that the NT was highly dynamic with random coil structure. Analysis of nuclear Overhauser effect spectroscopy (NOESY) results obtained with full-length Gal-3 failed to detect long-range NOEs from within the NT segment.
However, very weak NOEs may be obscured by resonance overlap and differential relaxation rates between the CRD and NT. To circumvent these shortcomings, we divided the NT into two halves and used NMR spectroscopy to investigate the respective synthetic peptides, namely residues 1–50 and 51–107 from the NT sequence, as illustrated in Figure. 1H NOESY spectra of peptide 1–50 showed, e.g.
The presence of i to ( i − 4) and i to ( i − 3) αβ NOEs between His8 and Ser12 (Figure A) and Ser6 and Asp9 (Figure B). All of the observed long-range NOEs are summarized in Figure C. These data demonstrate the presence of transient helical conformation between Phe5 and Gly15, as well as Pro-mediated, multiple turns between residues 18 and 32, in particular around Trp22/Trp26 whose aromatic rings may stack. Upon reducing the peptide's length to residues 2–21, no secondary structure NOEs could be detected (data not shown). This result suggests that the length of the NT sequence in this region is crucial for formation/stabilization of the observed secondary structure. In contrast to the NT's first half, the second peptide 51–107 yielded only a few, rather weak long-range NOEs around or within Pro-induced turns. ( A and B) Two expansions (αβ region) from a 1H NOESY spectrum ( 1H frequency of 700 MHz NMR, mixing time of 350 ms) of the NT polypeptide 1–50 (~1 mM) are shown.
Several ( i, i+ 1), ( i, i+ 3) and ( i, i+ 4) NOEs are labeled as. Overall, transient folding interactions within the NT and between the NT and the CRD provide a structural basis to help explain the increase in susceptibility of the NT to collagenase digestion upon denaturation and the detection of a thermal denaturation transition of ~48°C for NT residues 1–137 of murine Gal-3 at pH 10 (). That the T m with full-length Gal-3 is 39°C () suggests the influence of structural context on maintaining the protein fold by intra- and/or intermolecular interactions. Intramolecular interactions between NT and CRD Because our goal here was to better define NT interactions with the CRD, we have further assigned multiple resonances arising from Pro cis–trans isomerization (exemplified in A and B) and thereby have been able to better interpret our NMR spectra of Gal-3. In addition, we have been able to work with the natural material, free of any engineering, so that a His-tag was not present in the peptides or the protein, as studied.
We assessed interactions between the NT and CRD in a number of ways. First, we compared chemical shifts from 15N-labeled full-length Gal-3 with those from the 15N-labeled Gal-3 CRD.
HSQC spectral overlays are shown in Figure A. Using our complete resonance assignments for Gal-3, 1H, 15N-weighted chemical shift differences (Δ δ) are plotted as a function of the amino acid sequence in Figure B, and the largest Δ δ-values are identified by coloring in the structural model given in Figure C. Contact sites for the NT in full-length Gal-3 comprise β-strands 7, 8 and 9 on the F-face.
This finding is in general agreement with a recent analysis using His-tagged Gal-3 (). Here, we studied His-tag-free material to exclude the possibility that the His-tag itself could affect interactions between the NT and CRD.
Although we observed some changes with residues from the S-face (sugar binding face), these are relatively minor and could be explained by allosteric effects induced by interactions of the NT with the F-face. Interestingly, we previously observed binding of polysaccharides (galactomannans) to the F-face of Gal-1 and Gal-3 (,, ), and in these instances, ligand binding at the F-face allosterically attenuated affinity for lactose at the S-face and vice versa. Thus, the F-face these galectins appears to possess functional features for binding to both peptides and polysaccharides with binding to one face influencing affinity of interactions at the other. ( A) 15N– 1H HSQC spectra ( 1H frequency of 700 MHz) of 20 µM 15N-labeled full-length Gal-3 (blue) and 20 µM 15N-labeled Gal-3 CRD (red) are overlaid. Some highly shifted backbone and side chain NH resonances are labeled using assignments. Next, we used two synthetic NT polypeptides (i.e.
Residues 1–50 and 51–107) in titrations with 15N-labeled Gal-3 CRD to provide further evidence of these interactions. Peptide-induced shifting of CRD resonances in HSQC spectra are shown in Figure A with the overlay of several HSQC spectra from the titration with NT peptide 1–50. HSQC titration results with peptide 51–107 were essentially the same (). The binding sites for these polypeptides were delineated from plots of chemical shift changes (Δ δ) for peptides 1–50 and 51–107 vs. The Gal-3 CRD residue number (Figure B and C).
Of note, we found that both peptides, regardless of their having dissimilar sequences, perturb the same set of resonances within the CRD, an observation that was confirmed by a regression coefficient of 0.98 from a plot of Δ δ values for one peptide vs. The other (insert to Figure C). This indicates that both NT peptides interact with the same CRD site which is located within the 5-stranded β-sheet at the backside of the CRD (F-face, opposite the 6-stranded β-sheet S-face with the canonical carbohydrate-binding site). CRD residues showing the largest shift changes with NT peptide 1–50 are marked on the Gal-3 CRD structure in Figure D. As noted previously (), shorter NT-derived peptides representing proline-rich repeats III and IV also interact with residues at the CRD F-face, albeit differently from these two larger NT peptides, suggesting that a longer sequence better captures structural elements (e.g. Folding) characteristic for the NT and for optimal interactions with the CRD.
( A) 15N– 1H HSQC spectra ( 1H frequency of 700 MHz) for the 15N-labeled Gal-3 CRD (20 µM) in the absence (blue contours) and in the presence of NT peptide 1–50 at concentrations of 20 µM (orange), 60 µM (yellow). Our HSQC titrations provide additional information about the binding of these NT polypeptides to the Gal-3 CRD. Figure E and F plot Δ δ values for the most shifted resonances (residues 192, 198, 199, 202–204, 210–213 and 215–220) vs. Fiery Pro80-S450 65C-Km Ps V1.1A Driver. The concentration of each NT peptide as labeled. Although saturation was not reached with either peptide, Δ δ values tracked along a straight line upon increasing the NT peptide concentration (Figure A; ) and moved directly towards Δ δ values observed for the same CRD resonances in full-length Gal-3.
This is more clearly seen in Figure G which shows HSQC expansions for three of the most highly shifted resonances (V202, K210 and A216) with NT 1–50 and NT 51–107 as labeled. The blue contours are Gal-3 CRD resonances in the absence of either NT peptide, and the red contours are for the same CRD resonances in full-length Gal-3. NT peptide-induced chemical shifts track along a straight line; therefore, NT peptide binding can be explained by a two-state model in which the NT merely associates and dissociates from the F-face of the CRD. Because the titration was limited by NT peptide solubility and increasing viscosity, we estimated equilibrium dissociation constants ( K d) by using the chemical shifts of the same 16 most shifted resonances in full-length Gal-3 to represent 100% Gal-3 bound and taking the peptide concentration at 50% Gal-3 bound. The average of these 16 values yielded K D values of 917 and 1058 µM for the binding of NT peptides 1–50 and 51–107, respectively. This relatively weak binding is consistent with our HSQC data, where resonances are smoothly shifted during the titrations, indicating that interactions fall within the fast exchange regime on the chemical shift time scale.
Overall, our data indicate that NT-binding interactions with the CRD are the same for free NT-derived peptides and for the NT tethered to the CRD in intact Gal-3. To define the binding epitope within the NT, we recorded 15N HSQC spectra of this complete portion of Gal-3, i.e. The 15N-labeled NT (residues 1–108), shown in. Resonances were assigned using procedures as described previously (), and their chemical shifts were compared with those from the NT sequence in 15N-labeled full-length Gal-3 (Figure ).
Even though the largest Δ δ values are observed within the N-terminal part of the NT (residues 23–26, 37–40 and 42–45), other significant shifts are noted at residues 3–5, 52–56, 62, 66, 77–81, 93–96 and 101–108. Whereas changes at the C-terminal part of the NT (residues 101–108) could be explained simply by changes to the covalent structure of the peptide (i.e. Covalently bonded to the CRD in one case but not the other), most other changes were found to occur within or around PGAX sequences, especially those within the first 50 N-terminal residues (i.e. P 23GAW 26, P 37GAS 40, P 42GAY 45, P 51GAY 54 and P 76GAY 79).
The Gal-3 NT contains multiple PGAX repeats, in particular PGAY repeats (see Figure ). Thus, it appears as though the PGAX motif is a defining element for the CRD F-face binding epitope on the NT tail. Effects of PGAY and (PGAY) 4 peptides on Gal-3 CRD. Chemical shifts of HSQC resonances were determined for 15N-labeled Gal-3 CRD in the absence and presence of 4.45 mM PGAY tetrapeptide or 1.1 mM 16mer peptide (PGAY) 4, and their Δ δ values. To investigate whether NT interactions with the CRD F-face perturb, the interior of the lectin's β-sandwich structure and thereby possibly mediate allosteric effects at sites on the S-face, we recorded 1H– 13C HSQC spectra in the absence and presence of NT peptides 1–50 and 51–107, focusing on the well-resolved 13C-methyl region and therefore on various aliphatic side chains within the interior.
These results are shown in HSQC spectral overlays in Figure A, and the most shifted resonances are highlighted on the Gal-3 CRD structure (Figure B and C). Most of these methyl groups are located within the CRD β-sandwich. One of the key NT-interacting residues on the CRD, i.e.
Gln201 (shown in stick structure in Figure B and C), falls centrally among these methyls. The binding of NT-derived polypeptides to the surface of the F-face therefore can induce conformational and/or dynamical alterations within the interior of the lectin. This in turn can explain the bimodal charge distribution observed by mass spectrometry, which suggested that the protein can adopt extended and compact conformations (). In addition, the absence of spectral differences with a co-mixture of both peptides (Figure A) supports the conclusion that the two peptides compete for the same site on the CRD F-face and exert the same influence on residues within the CRD β-sandwich. Effects from phosphorylation of Gal-3 At this point, we have established that the N-terminal part of the NT is crucial for interactions with the F-face of the CRD and that it also displays some propensity to form α-helix or multiple-turn conformations (residues 5 to ~32).
This is interesting, because there are two sites within this NT region (Ser6 and Ser12) that are known to be phosphorylated () with functional significance, i.e. In nuclear export (; ). Therefore, we also investigated phosphorylated Gal-3 (Ser6 and Ser12) prepared by using casein kinase 1 for large-scale production ().
Incorporation yields were ~70% at Ser6 and 20% at Ser12. HSQC chemical shift differences observed between resonances from 15N-labeled Gal-3 and its phosphorylated form are shown in Figure A, with an expansion given in Figure B. The highly downfield shifted NH resonance of pSer6 is consistent with introduction of a phosphate group on the Ser6 side chain (), as also noted with a pSer6-containing N-terminal 20mer peptide (Pep-2, residues 2–21, in ). Amino acids in the vicinity of pSer6 are also significantly perturbed as expected (Figure B). Perturbations at NH resonances of residues 3 and 8–10 (and beyond) induced by this modification are consistent with helical structure within this region as discussed above. Intermolecular interactions between Gal-3 molecules In addition to providing insight into intramolecular reactivity profiles, HSQC spectral analysis can also help elucidate an intriguing property of Gal-3, namely reversible formation of complexes ranging from dimer to higher-order homo-oligomers. It is generally accepted that at low concentration Gal-3 is a monomer which at higher concentrations can aggregate.
This has been measured for example by chemical cross-linking, dynamic light scattering, electron microscopy, fluorescence correlation spectroscopy (FCS) and ultracentrifugation (;;;;;;; ). Here, we used pulsed field gradient (PFG) NMR self-diffusion experiments to measure Gal-3 diffusion coefficients at 30°C over a concentration range of 42–420 µM.
At lower concentrations, the diffusion coefficients for ligand-free Gal-3 and lactose-loaded Gal-3 are 1.1 × 10 −6 and 1. Adobe Indesign Cs7 Keygen. 17 × 10 −6 cm 2/s, respectively. Similar values have been reported for an even lower concentration of Gal-3 of ~1 µM by FCS ().
A gradual decrease in these diffusion coefficients was measured by PFG NMR at Gal-3 concentrations above ~100 µM. At 420 µM Gal-3, diffusion coefficients were 0.88 × 10 −6 and 0.89 × 10 −6 cm 2/s for ligand-free and ligand-loaded lectin, respectively. Assuming a diffusion coefficient of ~0.67 × 10 −6 cm 2/s for dimeric Gal-3 based on its molecular weight and the Stokes–Einstein spherical model, the weight-averaged quaternary structure falls between that of monomer and dimer. At the lower concentrations of Gal-3 (20–50 µM), we also found that diffusion coefficients for Gal-3 or Gal-3 CRD are not significantly altered by the presence of NT peptides 1–50 or 51–107. This indicates that the free NT does not interact to any great extent with Gal-3 and that Gal-3 self-association is not significantly influenced by their presence.
This tendency for weak association is also observed in HSQC spectra, as shown at 20 µM and 420 µM (Figure A). Of particular interest, these data enable us to infer sites of contact between Gal-3 molecules, and thus contribute to our understanding of the relative involvement of NT/CRD in Gal-3 self-aggregation. In this regard, note that, at the higher concentration, resonances from the CRD (and not the NT) are by far the most decreased in intensity or broadened (positive ΔIntensity values). Resonances of the NT are generally increased in intensity or narrowed (negative ΔIntensity values, Figure B), consistent with mere displacement of the NT from the F-face of the CRD.
This is not observed at the lower Gal-3 concentration, where aggregation is absent and signals from both CRD and NT display similar signal to noise ratios (Figure A). These data tell us that intermolecular Gal-3 interactions occur between their CRDs and apparently not between their NTs under conditions of this experiment. ( A) 15N– 1H HSQC spectra ( 1H frequency of 700 MHz) obtained with 15N-labeled Gal-3 at 20 µM (blue) and 15N-labeled Gal-3 at 420 µM (red) are superimposed. As discussed in the text, Gal-3 is essentially monomeric at 20 µM. 1H– 15N HSQC chemical shift mapping reveals that shift differences are largest for residues within the F-face of the CRD (Figure C, marked in orange on the structure of Gal-3 CRD in the insert).
This suggests that the F-face mediates interactions between two CRDs. Furthermore, we observed a decrease in the diffusion coefficient (i.e. Greater aggregation) upon raising the temperature from 15 to 40°C (data not shown).
This suggests that hydrophobic forces mediate interactions between molecules of Gal-3. Normally, one associates greater intermolecular dissociation with an increase in temperature; however, when hydrophobic forces dominate inter-molecular interactions, association is enhanced as the temperature is increased. In addition, the observation of sharper NT resonances upon Gal-3 aggregation (Figure B) is most likely explained by dissociation of the NT into solution when two CRDs associate via their F-faces. Nevertheless, because diffusion coefficients for truncated Gal-3 CRDs (having no NT tails) show no concentration dependence up to ~500 µM (i.e. No association), it appears that the NT likely does play some role in mediating interactions between CRDs in full-length Gal-3.
Given the complexity of available data on ligand-induced Gal-3 aggregation, e.g. Describing different effects between lactose and lacto- N-neo-tetraose (DiLacNAc), oligovalent glycoclusters and the nonavalent glycoprotein asialofetuin (;;; ), we also investigated the effect of DiLacNAc binding on Gal-3 self-association. For this experiment, we used a spacered derivative of this natural tetrasaccharide, in which the CH 3 group of the N-acetyl group at the C2 ring position of the reducing end Glc residue was replaced with a trifluoro-methyl group (a potential sensor for binding to galectins using 19F-based NMR spectroscopy (; ) with very minor, if any, influence on affinity) and the reducing end of the sugar is extended by an O1-linked ethyl azide group. HSQC spectra of 15N-labeled Gal-3 in the absence (black peaks) and presence of this ligand (red peaks) are shown overlaid in Figure A. ( A) Overlays of 15N– 1H HSQC spectra ( 1H frequency of 850 MHz) of 15N-labeled Gal-3 CRD (20 µM) are shown in the absence (black contours) and in the presence of 40 µM DiLacNAc derivative (red contours). Solution conditions are described. Whereas some Gal-3 resonances are highly chemically shifted by the presence of the tetrasaccharide, others are not.
Spectral effects are indicative of slow chemical exchange on the chemical shift time scale. During the titration, new resonances associated with the ligand-loaded state appear and increase in intensity, as resonances of ligand-free Gal-3 decrease in intensity.
Thus, the K d for this ligand should be in the low micromolar range, consistent with literature data on DiLacNAc and related glycans (;;;;; ). Chemical shift differences (Δ δ) of resonances between ligand-loaded and -free Gal-3 are plotted vs. The amino acid sequence of the lectin in Figure B, with residues showing the largest Δ δ values highlighted in red (>1 SD above the average) and orange (between the average and 1 SD) on the Gal-3 CRD structure in Figure C. Note that the largest Δ δ values are observed at residues within the canonical carbohydrate-binding S-face, indicating that DiLacNAc binds to the canonical site for a β-galactoside. We also observed changes in intensities between unligated and ligated Gal-3 resonances, as shown in Figure D. These generally follow trends observed with Δ δ values (Figure B) and are consistent with slow exchange binding of DiLacNAc to the S-face and consequent effects at the F-face. Because equal populations of ligand-free and -loaded Gal-3 at 20 µM occur at 10 µM DiLacNAc, binding stoichiometry is 1:1 as expected.
More importantly, while chemical shift and intensity changes of some resonances from residues within the F-face are relatively large (indicated by F-face-labeled bars in Figure B and D), effects at residues within the NT are all very small, if present at all. If the NT were involved in intermolecular Gal-3 interactions, then Δ δ and ΔIntensity values would have been much greater for residues within the NT, and they are not. Any such small changes of resonances within the NT may be explained simply by release of the NT from the CRD upon association of Gal-3 CRDs. Thus, our data indicate that ligand-induced Gal-3 self-association occurs weakly and via interactions between CRD F-faces of Gal-3 molecules, consistent with an earlier report by ). This finding is supported by the concentration dependence of HSQC spectra for ligand-free Gal-3, as well as by changes in diffusion coefficients that suggest formation of transient Gal-3 aggregates no larger than dimers. As also mentioned above, however, this does not exclude the possibility that the NT is somehow involved in CRD–CRD interactions.
Conclusions The primary interactions between the Gal-3 NT and CRD occur between the N-terminal segment of the NT and the F-face of the CRD, with the sequence P 23GAW 26P 37GASYPGAY 45 defining the primary binding epitope within the NT. Along with the remainder of the N-terminal part of the NT (residues 5–18), this segment has the propensity to form α-helix and/or multiple-turn structures, which could help promote binding, albeit relatively weak, to the CRD. Even though phosphorylation of Ser6/12 has little effect on interactions between the NT and CRD F-face, it may allosterically influence carbohydrate binding to the S-face. In addition, although Gal-3 self-association is enhanced by S-face binding of DiLacNAc, the Gal-3 aggregation process occurs primarily via interactions between CRD F-faces, with the NT apparently playing some as yet undefined role in promoting this aggregation event. Overall, this study has advanced our knowledge of Gal-3 structure and will spur the study of interactions of multi-functional Gal-3 with its many in situ binding partners, especially with protein counter-receptors such as Bcl-2, as well as with complex polysaccharides. Galectin-3 expression and purification Full-length human Gal-3 (residues 1–250) and human Gal-3 CRD (residues 108–250) were recombinantly produced with [ 15N]NH 4Cl and/or U-[ 13C]glucose as medium additive(s) in Escherichia coli BL21 (DE3)-pLysS cells (Promega, Mannheim, Germany) using the cDNA inserted into the pET12a vector platform (Novagen, Darmstadt, Germany) at 30°C with 400 µM IPTG induction for 16 h. The protein was purified by affinity chromatography on lactosylated Sepharose 4B as a crucial step; lactose was removed by several rounds of ultrafiltration and gel filtration (PC-10), and the protein was checked for purity and activity as previously described (;; ).
Preparation of 15N-enriched NT of Galectin-3 The 15N-enriched N-terminal tail ( 15N-NT) of Gal-3 was prepared from 15N-enriched His-tagged NT ( 15N-His-NT) by thrombin digestion. Briefly, cDNA for His-NT was inserted into the pET28a vector between BamHI and EcoRI sites. Escherichia coli BL21 (DE3) cells were transformed with this construct and induced to express protein in minimal medium with 15NH 4Cl as the nitrogen source. Bacteria were grown at 37°C for 12 h and induced to express 15N-His-NT by 0.2 mmol/L IPTG at 25°C for 16 h. After centrifugation, bacteria were resuspended in phosphate buffer and lysed by ultrasonication.
The cell lysate was incubated with Ni-NTA agrose beads. After extensive washing, the beads with bound 15N His-NT were digested by 2 U/mg thrombin. His-tag-free 15N-NT was then released into the buffer and recovered following dialysis. Peptide synthesis Peptides used in this study were manually synthesized using tert-butyloxycarbonyl ( tBoc)-based solid phase peptide synthesis and then purified by using HPLC as previously described ().
Four peptides were produced: (i) NT 1–50, comprising NT amino acid residues 1–50: MADNFSLHDA-LSGSGNPNPQ-GWPGAWGNQP-AGAGGYPGAS-YPGAYPGQAP, (ii) NT 51–107, comprising NT residues 51–107: PGAYPGQAPP-GAYHGAPGAY-PGAPAPGVYP-GPPSGPGAYP-SSGQPSAPGA-YPATGPY, (iii) tetrapeptide PGAY, and (iv) (PGAY) 4: PGAYPGAYPGAYPGAY. In short, these peptides were prepared on a 0.2 mmol scale using the in situ neutralization/activation procedure for butyloxycarbonyl-/benzyl- (Boc-/Bzl)-based peptide synthesis using HCTU ( N-[1H-6-chlorobenzotriazol-1-yl)-(dimethylamino)methylene] N-methylmethanaminium hexafluorophosphate N-oxide) instead of HBTU (2-(1H-benzotriazole-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate) as a coupling reagent.
MBHA ( p-methylbenzhydrylamine) resin (1 meq/g) was used as the solid support. In the case of NT 1–50, glycines were replaced by 15N-glycines (Sigma). After synthesis, the resin-bound protected peptide was treated with 4 mL mercaptoethanol/2 mL DIPEA (diisopropylethyl-amine) in 14 mL DMF (dimethlformamide) (2 × 30 min) to remove the Dnp protecting group from histidine. Next the resin-bound peptide was treated with TFA (trifluoroacetic acid) (2 × 1 min) to remove the N-terminal Boc group, then washed sequentially with DMF, DCM and 1:1 (v/v) DCM/MeOH and dried. Thereafter, the peptides were deprotected and cleaved from the resin by treatment with anhydrous HF for 1 h at 0°C, using 4 v% p-cresol as a scavenger. Following cleavage, the peptides were precipitated with ice-cold diethylether, dissolved in 0.1 M sodium acetate buffer (pH 4) containing 6 M Gn.HCl, and purified by preparative HPLC using a Vydac C-18 column (250 × 10 mm, 10 µm) and a linear gradient of acetonitrile in water/0.1%TFA (flow rate of 5 mL/min; 0.2% B/min).
Fractions containing the product were identified by ESI-MS, pooled and lyophilized. ESI-MS was performed on an Applied Biosystems SCIEX API 150 EX electrospray ionization quadrupole (ESI-Q) mass spectrometer. Peptide masses were calculated from the experimental mass-to-charge ( m/ z) ratios of all the protonation states observed in the ESI-MS spectrum of a peptide using Analyst 1.4.2 software (SCIEX). General procedures Unless noted, chemical reagents and solvents were used without further purification from commercial sources. Dry solvents as CH 2Cl 2, Et 2O and THF were obtained from a PureSolv-EN™ solvent purification system (Innovation Technology Inc.).
Concentration in vacuo was performed using a Buchi rotary evaporator. The 1H/ 13C/ 19F NMR spectra ( δ in ppm, relative to TMS in CDCl 3) were recorded using Varian spectrometers (Varian, Palo Alto, CA) (400/101 or 500/125 MHz) at 25°C.
Assignments were aided by 1H– 1H and 1H– 13C correlation experiments. HRMS spectra were recorded on a micromass LCT instrument from Waters. LRMS spectra were recorded on a Waters micromass Quattro Micro LC–MS/MS instrument using electrospray ionization (ESI) in either positive or negative mode. Optical rotations were recorded on a Perkin-Elmer polarimeter (Model 343) at the sodium D-line (589 nm) at 20°C using a 1 dm cell and are not corrected. Silica gel chromatography was carried out using Davisil LC60A (Grace Tech., Columbia, MD) SiO 2 (40–63 µm) silica gel.
All reactions were monitored by thin-layer chromatography (TLC). TLC was performed on Merck DC-Alufolien plates precoated with silica gel 60 F254. They were visualized with UV-light (254 nm) fluorescence quenching, and/or by charring with an 8% H 2SO 4 dip and/or ninhydrin dip. Deprotected sugars were lyophilized using a freeze-dryer Alpha 1–2 Ldplus (Christ Ltd.), with a pressure of 0.035 mbar and ice condenser temperature −55°C. Complete experimental details and reaction schemes for the synthesis of the spacered tetrasaccharide are provided in.
Its chemical structure is shown below. NMR spectroscopy NMR experiments were performed at 30°C on Bruker Ascend 700 MHz or Bruker Avance III 700 or 850 NMR spectrometer, each equipped with a cryogenically cooled z-gradient TXI probe.
Samples for 1H– 15N HSQC experiments contained 15N-labeled human Gal-3 CRD or 15N-labeled full-length human Gal-3 at certain concentrations between 20 and 420 µM, and were prepared in 20 mM potassium phosphate buffer (pH 6.9) made out of 96% H 2O plus 4% D 2O for the field-frequency lock. Lactose, still present from affinity elution during purification, was removed by extensive filtration over Amicon (EMD Millipore, Darmstadt, Germany) Ultra-4 ultracentrifugation filters with a molecular cut off of 3 kDa (applying five to six subsequent buffer subsequent exchange steps starting from 4.75 mL volume and concentrating down to 250 µL). Resonance perturbations (chemical shift and resonance broadening differences) were monitored using sequence-specific heteronuclear ( 1H, 15N, 13C) assignments for full-length human Gal-3 () and 1H and 15N assignments for Gal-3 CRD (). Pulsed field gradient (PFG) measurements on Gal-3 were carried out at 30°C and 700 MHz using the Bruker pulse sequence stebpg1s19 with stimulated echo, bipolar gradients and Watergate solvent suppression.
Processing of NMR data was performed using the Bruker Topspin 3.2 program (Rheinstetten, Germany), and Sparky 3.114 software () was used to analyze 2D and 3D spectra. Peak integration of 1D spectra was carried out using Topspin, whereas PFG data were fitted and analyzed with Word Excel macros. Chemical shifts were internally referenced to DSS (4,4-dimethyl-4-silapentane-1-sulfonic acid), and chemical shift differences (Δ δ) were calculated as [(Δ 1H) 2 + (0.25Δ 15N) 2] 1/2.
Intensity changes (ΔIntensity) were calculated as (1 − Int i/Int o), where Int i is the resonance intensity at some new condition (addition of peptide or more Gal-3) and Int o is the resonance intensity initially. A value of 0 indicates the absence of resonance broadening, and a value of 1 indicates that the resonance is no longer observable. A negative value indicates that resonances have increased in intensity, i.e. Become more narrow. When conditions between samples (e.g. Concentrations) differed, intensities in both spectra were first normalized to intensities of resonances from the first 10 N-terminal residues.
IDM 6.23 build 20 Setup 22Aug2015 +Final Crack 8.07 MB Internet Download Manager aka IDM developers release a new build of their well-known Download Accelerator; Internet Download Manager regularly. So everybody who uses pirated versions get so pissed off that they have to find a new version of crack every time when an IDM update comes. So we made a really awesome fix for that An Universal Web Crack. A new era in scene world. Web crack in a new concept of cracks that download and update crack content as the target program gets updated. Crystal Impact Match! Is an easy-to-use software for phase identification from powder diffraction data, which has become a daily task in material scientists work.
Compares the powder diffraction pattern of your sample to a database containing reference patterns in order to identify the phases which are present. Single as well as multiple phases can be identified based on both peak data and raw (profile) data.As reference database, you can apply the included free-of-charge IUCr/COD/AMCSD database and/or ICSD/Retrieve (if you have a valid licence), use any ICDD PDF product, and/or create a user database based on your own diffraction patterns. The user database patterns can be edited manually, imported from peak files, calculated from crystal structure data (e.g. CIF files), or imported from your colleague's user database. YouTube Video Downloader PRO v4.9.1.0 FINAL + Crack YouTube Video Downloader PRO v4.9.1.0 FINAL + Crack [TechTools] YouTube Downloader allows you to download videos from YouTube, including HD and HQ videos, Facebook, Vevo, and dozens of other video sites and convert them to other video formats.
The program is easy to use?just specify the URL for the video you want to download and click the Download button. The program also allows you to convert downloaded videos for iPod, iPhone, PSP, Cell Phone, Windows Media, XVid and MP3, or play video that you have previously downloaded or converted.